Skip to main content
PC-ENZ-PF-3L
(No reviews yet) Write a Review

Phosfree (3 Liter)

Description

  • Most effective way to remove phosphates prior to using a weekly maintenance product
  • Works in the filter (no clouding of the pool water)
  • Reduces phosphates down to near zero
  • Reduces pool maintenance
$39.75
Adding to cart… The item has been added

Description

  • Most effective way to remove phosphates prior to using a weekly maintenance product
  • Works in the filter (no clouding of the pool water)
  • Reduces phosphates down to near zero
  • Reduces pool maintenance

WARNING: Products featured on this website can expose you to chemicals known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Details

  • Most effective way to remove phosphates prior to using a weekly maintenance product
  • Works in the filter (no clouding of the pool water)
  • Reduces phosphates down to near zero
  • Reduces pool maintenance

INSTRUCTIONS

Directions for use:

This product is designed for use in properly balanced pool water.

  1. Clean or backwash filter.
  2. Determine appropriate dose. * See chart below.
  3. Shake bottle well prior to application. With circulation pump running, add dose to skimmer.
  4. Run filter for 48 hours continuously without backwashing or cleaning.
  5. After 48 hours of filtering, clean/backwash filter. Retest phosphate levels, and if necessary, repeat steps 1-5.

Note: If DE filter pressure rises to 10psi above start-up pressure, turn pump off for 1 minute and then turn it back on. If pressure remains high, backwash or rinse for 30 seconds.

Dosage Chart

Dose per 10,000 gallons (38,000L)

Phosphate Level PHOSfree Dosage
300ppb or less 0.5L or 16oz
600ppb 1L or 32oz
900ppb 1.5L or 48oz
1200ppb 2L or 67.6oz

Related Products